|
|
Timing Boards/Modules
|
|
The TX Oncore™ is a high performance, accurate and cost-effective GPS timing receiver featuring the ALL NEW Smart-Start™ Technology. With the ability of tracking 16 satellites simultaneously, and a sensitivity of up to -159dBm, this receiver also supports the AGPS augmentation system. This industrial grade timing receiver includes a 1PPS accuracy of <20 nanoseconds, 1PPS configurability options, and 1PPS output even when the RF signal is completely lost. Backward-compatibility using an adapter board facilitates the seamless migration from the M12M Timing Receiver™ to the new TX Oncore™. Preliminary information available now. Look for Summer 2010 Introduction. Contact a Synergy Systems, LLC representative for details. |
|
Read more...
|
|
|
Timing Boards/Modules
|
|
Designed by Motorola, the M12M is a true 3 Vdc replacement to the current M12+ receiver. The M12M has the same "form, fit, function" as the M12+ (same options, mechanical dimensions, and communication commands) and uses the SiRF GPS MG 2000 IC within the RF section and a TCXO instead of a standard crystal oscillator providing a higher degree of reference oscillator stability. The M12M has an Input Gain Range of 10-50dB, where the M12+ has a range of 18-36dB. The M12M Timing unit has improved Time to First Fix - approximately 150 seconds Cold Start where the M12+ is approximately 200 seconds, and power consumption is approximately 150mW.
(data sheet)
|
|
|
Timing Boards/Modules
|
|
This dual port, M12M development board (no enclosure) is suitable for laboratory testing of the M12M and M12M Timing GPS receivers. On-board LEDs indicate Power On, TXD, RXD, 1PPS, and DGPS In.
The M12M Timing Starter Kit consists of an M12M development board; M12M Timing GPS receiver; Power Supply Kit, 9VDC Out, 100-264VAC Input; Active GPS Antenna; and Standard 9 pin serial cable.
(data sheet)
|
|
|